Machine Features
1.QLK1336C CNC pipe thread lathe is newly designed.The main drive is designed according to the rated frequency working range of the spindle servo motor. Full stepless speed regulation, wide speed range, not only meets the requirements of high-speed thread finishing, but also efficient cutting and low noise.
2.The machine bed is an integral structure, which greatly improves the rigidity of the machine tool. The guide rail surface of the bed is wide, and is super-audio quenched and precision grounded. The saddle rail is attached with YT soft belt to ensure the accuracy and service life of the machine.
3.The integral gearbox spindle unit,big power spindle servo motor,full stepless speed regulation. The speed range is wide, which not only meets the requirements of thread finishing, but also achieves efficient cutting. The application of quenching precision grinding gears and high-quality bearings ensures low noise and good sound quality.
4.The headstock adopts a strong external circulation cooling lubrication system, which not only reduces the temperature rise of the spindle, but also effectively keeps the headstock clean and lubricated.
5.The X and Z axes adopt high-precision ball screw direct drive and lead screw prestressed tension structure. The nut hanger is an integral casting structure.
6.The machine is equipped with 300*300 large-size 4-station vertical electric tool holder to make the machine tool with high processing efficiency and more effective to ensure finishing turning the precision of the inner hole.
7. The main drive gear of the machine tool is manufactured by SMTCL; the protective sheet metal is designed independently and made of standard cold-rolled steel plate.
The machine is widely used in the petroleum industry for the processing of drill pipe,pipe joints, casings pipes and other parts, and can also be applied to the processing of various pipe threads in the chemical, coal, geological and other industries.
Specification
Item |
Unit |
Specifications |
Remark |
Max.turning diameter of machine body |
mm |
1000 |
|
Max.workpiece length |
mm |
1500 |
|
Max.turning diameter of Tool holder |
mm |
615 |
|
width of Bed |
mm |
750 |
|
Diameter range of pipe thread |
mm |
160-350 |
|
Spindle bore |
mm |
360 |
|
Front chuck |
mm |
Manual four jaw -chuck φ800*320 |
|
Back side chuck |
mm |
Manual four jaw -chuck φ800*320 |
|
Spindle speed |
r/min |
12-300 |
|
Main motor power |
kw |
22 |
Spindle servo |
Rapid feed and thread pitch range |
mm |
0.0001-30 |
|
X-axis travel |
mm |
550 |
|
Z-axis travel |
mm |
1250 |
|
Spindle center to Tool installation datum |
mm |
48 |
|
Tool section size |
mm |
45x45 |
|
Tool |
|
Vertical four-position electric tool |
|
Tailstock sleeve diameter |
mm |
140 |
|
Tailstock sleeve travel |
mm |
300 |
|
Taper of tailstock taper hole |
Mohs |
6 |
|
Lateral displacement of tailstock |
mm |
±25 |
|
CNC Controller |
|
GSK980TDI |
|
Machine weight |
Kg |
11000 |
|
Dimension |
mm |
4700*2155*2090 |
|
Cooling mode |
|
External circulation cooling |
|
Main power supply |
|||
Voltage |
V |
380 |
|
Voltage fluctuation range |
|
-10~+10 |
|
Frequency |
Hz |
50 |
|
Total capacity |
KVA |
32 |
|
Machine's Main Parts
(1)Machine body
The width of body rail is 750mm,material is HT300.Ultrasonic frequency quenching is achieve to HRC52.The roughness is Ra0.63 after grinded by high-precision grinding machine.It has high-precision and abrasion performance. The machine body is an integral structure, which greatly improves the rigidity of machine tool.
(2)Headstock
Integral gear box type spindle unit, high power spindle servo motor, stepless speed regulation. Wide range of speed regulation, not only to meet the requirements of high-speed thread finishing, but also to achieve efficient cutting.Quenched and precision grinding gear, high quality bearings, to ensure the machine low noise, good sound quality.
The headstock uses the strong external circulation cooling lubrication, not only reduces the temperature of spindle,but also keeps the cleanness and lubrication of headstock.
(3)Tailstock
This machine tool is standard withφ140 tailstock spindle. Mohs 6# top.
(4)CNC Turret
Adopts (AK21300X4C) CNC vertical tool holder which produced by Yantai Global Machinery accessories. It has the characteristics of high precision, smooth rotation, simple operation and so on.
(5)Double-axis feed
Both X axis and Z axis adopt high precision ball screw direct drive and lead screw prestress tension structure. Precision ball screw bearings are used for positioning and supporting; the Z axis screw nut rack is an integral casting structure.
Main Parts Pictures
Packing & Delivery
Reference Pictures and Workshop
Contact: Ms.Sharo
Phone: +86 136 6166 0678
Tel: +86-574-8711 7865
Email: info@oturnmachinery.com
Add: 1204# Haida Building, Tongji Road, Jiangbei District, Ningbo,China.