Machine Features
1.The machine sets up two independent processing areas, which can realize the docking of the two spindle machining parts, and can also meet When one of the machining areas is adjusted (measuring the workpiece, adjusting the tool, etc.), it does not affect the normal operation of the other machining area.
2.The machine is fully enclosed and protected. The front double-sliding door is opened, and the middle spindle docking window is set to automatically open and close the door.
3.If automatic loading and unloading is provided, the upper and lower manipulator access channels are also equipped with automatic opening and closing devices.
Specification
Item |
Specification |
Unit |
DCK201S |
DCK202S |
|
Processing range |
Max. swing over bed |
mm |
Φ600 |
Φ600 |
|
Max. swing over cross slide |
|
Φ550 |
Φ550 |
||
Max. Processing Dia. |
|
Φ200 |
Φ225 |
||
Max.Drilling Dia. |
|
Φ20 |
Φ20 |
||
Max.processing length |
|
Shaft member 120Machining inner hole Max. depth 80 |
Shaft member 135Machining inner hole Max. depth 120 |
||
Headstock |
Spindle speed range |
r/min |
30~4000 |
30~4000 |
|
Spindle head specifications |
|
A6 (8-inch chuck) |
A6 (8-inch chuck) |
||
Spindle taper |
Mohs |
6# |
6# |
||
Spindle bore |
mm |
φ55 |
φ55 |
||
Spindle center to ground height |
mm |
1050 |
1050 |
||
Feed |
Travel |
X1/X2 |
mm |
255 |
215375(With power tool) |
Z1/Z2 |
350 |
445 |
|||
Tool |
Drive mode |
|
Rotary servo, locking hydraulic |
Rotary servo, locking hydraulic |
|
Tool quality |
station |
8/12 Pcs |
8/12 Pcs |
||
Outer round tool size |
mm |
□25×25 |
□25×25 |
||
Max. boring bar Dia. |
|
Φ40 |
Φ40 |
||
Max. swing over the tool tip |
|
φ590 |
φ635 |
||
Chuck |
Hydraulic power chuck |
|
φ200 |
φ200 |
|
Total machine capacity |
KVA |
|
|
||
Machine size |
mm |
4412×2307×1860 |
4812×2307×1860 |
||
Machine weight |
Kg |
6000 |
7000 |
Contact: Ms.Sharo
Phone: +86 136 6166 0678
Tel: +86-574-8711 7865
Email: info@oturnmachinery.com
Add: 1204# Haida Building, Tongji Road, Jiangbei District, Ningbo,China.