CNC Machining Center

  • VMC850 CNC Machining Center
  • VMC850 CNC Machining Center
  • VMC850 CNC Machining Center
  • VMC850 CNC Machining Center
  • VMC850 CNC Machining Center
  • VMC850 CNC Machining Center
VMC850 CNC Machining CenterVMC850 CNC Machining CenterVMC850 CNC Machining CenterVMC850 CNC Machining CenterVMC850 CNC Machining CenterVMC850 CNC Machining Center

VMC850 CNC Machining Center

  • Model: VMC850
  • CNC Controller: Syntec 21Ma
  • Spindle: BT40/10000rpm/11-15kw
  • ATC Disc Type: 24pcs
  • Product description:
  • INQUIRY

Main features and description


1. High quality castings: machine main pieces: base, saddle, table, column, the headstock are made of high quality resin sand molding, high strength and high quality cast iron, with heat treatment process improvement to eliminate the residual stress, and the layout of sufficient reinforcement plate to ensure that the whole machine has enough strength and rigidity ,high stability;

2.Super wide base: one casting, four layers of honeycomb mesh structure, provide the most stable load support capability, coupled with the water guiding plate design, cutting fluid leakage

3. Herringbone column: widening with span, improve the rigidity of the machine. The shoulder loading type ATC bracket, can enhance the rigidity of the column, and can also ensure that after the installation of the ATC, the column precision.

4. Rib type die design: internal ribs bold increase, strengthen the structure rigidity, and the golden ratio structure of 1:1:1 greatly improve the processing stability.

5. Taiwan C3 ball screw: the system C3 grinding double nut ball screw to ensure the accuracy of the axial operation. Three axis full stroke process, to effectively enhance the dynamic accuracy and service life.

6. Three axis drive with precision, high efficiency, high torque, high precision AC servo motor through flexible coupling is directly connected with the ball screw rod, eliminates backlash, and the ball screw assembly by American brands imported screw support bearings at both ends of the pre tension deformation effect on the precision of installation, operation process of ball screw in the hot rod to avoid the maximum precision.

7. Increase the line rail design: three axis of Taiwan high precision table P rectangular sliding rail, with strong rigidity, dynamic accuracy is better, and the largest in the same type.

8. Z-axis Design: Z axis high power motor with brake device configuration, the axis is more responsive, no vibration, more conducive to drilling, boring, tapping.

9.Precision spindle: spindle bearing preload imported high precision angular contact ball bearing, give maximum rigidity of the spindle and the highest precision, steady precision; the torque of AC servo spindle motor, can carry heavy cut, especially suitable for high-speed machining applications, improve machining accuracy and smoothness, shorten the processing time;

10.The pipeline internal external wire: so using high quality cable, and a nylon tube, avoid iron chips and cutting fluid erosion damage to the pipeline, to ensure that the machine life.

11.The operation panel according to ergonomics scientific layout, comply with safety regulations, rotating design, easy to operate; Schneider, OMRON and other imported brands of high quality original device, ensure the high reliability of the whole machine; a portable handheld remote control unit, which greatly facilitates the tool setting, try cutting;

12. fully enclosed metal shield, protection is good quality, beautiful and generous.


Specification


Specification

Model:VMC850

Positioning Accuracy

±0.01/300mm

Repeatability

±0.01/300mm

X,Y,Z Axis Travel

800×550×550mm

Spindle nose to work table

140-700mm

Spindle center to column

595mm

Table Size

1000×550mm

T-slot size

5 X18 X 90mm

Max. Loading

500kg

Spindle Taper

BT40

Cutting feed speed range

1 – 10m/min

X/Y/Z axis rapid displacement

36/36/24m/min

Three axis ball screw

Ø32 X P16mm

X axis rail width / track number

35 (6 slider roller)

Y axis rail width / track number

35 (4 slider roller)

Z axis rail width / track number

35 (6 slider roller)

Spindle Speed

10000rpm

Spindle Motor Power

11-15kw

Three axis motor power(x/y/z)

1.8/1.8/3kw

Spindle Connection

Direct Type

Weight

5000kg

Oversize

3000X2300X2550mm


Configurations


No.

Name

Spec

Brand

Original

Notes

1

CNC Controller

21Ma

Syntec

Taiwan

Standard

2

Screw

Φ32 mm×P16mm

HIWIN/PMI

Taiwan


3

Guide




Two Linear way+One Box Way

4

Three-axis Servo Motor


Yaskawa

Japan


5

Spindle Servo Motor

11-15kw

Solpower

Taiwan


6

Spindle

10000rpm

Royal/Posa

Taiwan


7

Oil Chiller


Point

Taiwan


9

Chin Conveyor

Chain Type


China