Products

You are here: Home » Products » 5-axis CNC Machining Center » 5-axis CNC Gantry Machining Center » 5-axis Gantry Machining Center GF Series

5-axis Gantry Machining Center GF Series

The five-axis Simultaneous Gantry machining center GF series has the characteristics of high rigidity, high precision and high efficiency machining.

Quantity:
Availability:





Inquire Add to Basket

Brand:
Oturn

5-axis Gantry Machining Center GF Series Simultaneous 5 axis Gantry machining center High Precision 5 Axis cnc milling machine 5 axis Simultaneous cnc machining center Simultaneous 5 axis Double Column machining center

Features

Optional Configuration

Technical Specifications

Processing Cases

Five-axis Gantry Machining Center GF Series

Tilted Design Of The X-axis

The mounting platform height of different X-axis linear guide rails ensures high rigidity and realizes high-speed and high-precision positioning.
Special U-shaped Saddle Design

The head is designed with high rigidity headstock,which is clamped by U-shaped saddle through guide rails on both sides to ensure the high rigidity of Z-axis extension machining.
The Joint Surface Of The Whole Machine Structure Is Precision Shoveled

Its contact area is more than 90% to ensure the geometric accuracy of the whole machine.
Ultra Stable Accuracy

The screw rod adopts the installation mode of fixed pre-tension at both ends and scraping at the casting joints to ensure the ultra-high and ultra-stable precision of the machine tool under large travel.
Integrated Gantry And Base

Column beam integrated design, improve the rigidity of the machine and processing stability.
F1 Fork Type Synchronous Two-axis Milling Head

The symmetrical cross structure has higher structural rigidity and vibration suppression than the same level models.
The B/C axis uses a direct drive motor and a high-response hydraulic brake system, which has higher precision, zero backlash and zero wear.
The water-cooled circuit design and the spindle is equipped with a central water outlet as standard, which can effectively suppress temperature rise changes and ensure higher precision.

Optional Configuration

Broken Tool Detection In The Magazine

The detection unit is installed in the tool library, and the detection process and the processing process are carried out simultaneously, without affecting the processing beat.

Axial Optional Scales

The measured output signal is digital pulse, which has the characteristics of large detection range, high detection accuracy and fast response speed.

Online Detection System

Reduce tool setting and workpiece alignment time, and save 90% auxiliary time; Reduce the waste products caused by the alignment error of tool setting and workpiece, and improve the yield.

Laser Tool Setting Instrument

Fast and accurate detection of tool size to ensure long-term use without wear.

Cutting Fluid Cooling Device

The thermal displacement of fifixture and workpiece caused by the temperature rise of cutting flfluid will affect the machining accuracy; The system can ensure the temperature rise of cutting flfluid within 3-5℃

Oil Mist Gathering System

High purication rate, stable operation, silent noise oor. Effectively lter the water-soluble air and oil mist smoke in the workshop and deeply purify the air.

Technical Specifications

Project		GF2020-5X	GF3020-5X	GF4020-5X
Travel	X/Y/Z axis travel	2000×2000×800mm	3000×2000×800mm	4000×3000×1000mm
Travel	Spindle nose to table center	90-890mm	80-880mm	-100-900mm
Table	Table size	2000×1100mm	3000×1200mm	4000×2000mm
Table	Max.table load	2000Kg	2500kg	20000kg
Spindle	Spindle taper	HSK-A63	HSK-A63	HSK-A100
	Max.spindle speed	18000rmp	18000rmp	8000rmp
	Spindle motor power	30/33.5KW	30/33.5KW	70/75KW
	Spindle motor torque	72/85Nm	72/85Nm	350/450Nm
Feed rate	Rapid speed of X/Y/Z axis	36/30/30	30/30/30	15/15/10
Feed rate	Cutting feed	1-12000	1-12000	1-10000
ATC	Number of tool	24T	24T	24T
	Maximum tool length	400mm	400mm	400mm
	Maximum tool diameter	120mm	120mm	250mm
	Maximum tool weight	8kg	8kg	15kg
	Tool changetime (tool to tool)	4.5S	4.5S	5S
Three axis	X-axis guide	45/4 Roller	45/5 Roller	45/4 Roller
	Y-axis guide	55/2 Roller	55/2 Roller	65 Roller
	Z-axis guide	55/3 Roller	55/3 Roller	65 Roller
	X-axis screw	φ50×16	φ63×16	φ80×20
	Y-axis screw	φ50×16	φ50×16	φ63×16
	Z-axis screw	φ50×12	φ50×12	φ63×16
Precision	Positioning precision	±0.005/300mm	±0.005/300mm	±0.005/300mm
Precision	Repeating positioning precision	±0.003/300mm ±0.003/300mm		±0.003/300mm
Power	Power requirement	Three-phase 380V±10%,50Hz±1%Three-phase 380V±10%,50Hz±1%		Three-phase 380V±10%,50Hz±1%
	Air pressure	≥6kg/c ≥6kg/c		≥6kg/c
	Air flowrate	≥0.5mm³/min ≥0.5mm³/min		≥0.5mm³/min
Machine size	Machine weight	20T 22T		50T

Processing Cases

NEW ENERGY VEHICLE PROCESSING APPLICATION

High Processing Efficiency
One-time clamping of workpiece, 5-axis simultaneous control
Vertical, horizontal and various free angle processing can be completed synchronously.
High Material Removal Rate
High speed, high power spindle
High rigidity and high dynamic characteristics of the whole machine structure.
High Cutting Feed Rate
XYZ axis high speed drive
High rigidity and high dynamic characteristics of the whole machine structure.
AEROSPACE PROCESSING APPLICATIONS

Excellent Surface Processing Quality
Five-axis simultaneous cutting application
High-precision processing capability
Greatly Shorten Processing And Polishing Time
Linear motor drive
X/Y/Z axis high-speed drive
High Precision
High-speed, high-power spindle
High rigidity and high stability of the whole machine structure