English
English
| Quantity: | |
|---|---|
Oturn
Introduce
The 30° inclined layout and integrated bed base structure greatly improve the bending and torsional rigidity of the machine tool during operation. The high rigidity and high stability integrated bed base provide a strong guarantee for the high precision of the whole machine.
The spindle unit is an independent sleeve type. The spindle system has undergone rigorous dynamic balancing tests, with high precision, good precision retention, small thermal deformation, and good thermal stability. The Max. speed can reach 4500rpm, and the nose end run out accuracy is within 0.003MM. The front end of the shaft uses a large-diameter high-precision double-row roller bearing with a combined angular contact ball bearing structure, and the optimal span two-point balanced support design can withstand radial and axial loads. It can also be suitable for users to perform high-speed precision cutting and low-speed heavy cutting. It is especially suitable for mass production of products with complex shapes, high precision requirements, and high finish.
The high-rigidity overall design servo turret is matched with a high-precision clutch to ensure its positioning accuracy and repeat positioning accuracy. The servo motor drives the cutter head to rotate in both directions or select the tool at any nearby place. The hydraulic principle is used to loosen and clamp the clutch, and the proximity switch is used to feedback the clutch action signal to quickly and accurately achieve the tool change action.
The programmable hydraulic tailstock has a high rigidity structure and an integral tailstock, which can eliminate vibration and has excellent stability. It can be controlled by program or manual buttons, and the sleeve extension and retraction is realized by hydraulic cylinder, which is convenient, fast and reliable.
The feed system is directly driven by a servo motor, with good rigidity, precision and dynamic response characteristics. The machine tool is equipped with a roller linear guide rail, and the Max. fast moving speed can reach: 20m/min.
This machine provides users with a complete hydraulic and lubrication system, using high-quality hydraulic pumps and hydraulic valves and other components to greatly reduce the failure rate. The hydraulic and lubrication system design is simple and reliable. The machine tool adopts centralized quantitative automatic lubrication.
automatic chip removal device can greatly reduce the labor intensity of operators and realize safe and efficient production. All the above functional parts can realize programmed control, and various special fixtures can be designed and installed according to the special requirements of users.
Technical Specifications
Item Model | Name | Unit | 200MSY | 200MS |
Travel | Max. bed rotation diameter | mm | Ф660 | Ф660 |
Max. processing diameter | mm | Ф370 | Ф320 | |
Max. processing diameter on tool holder | mm | Ф300 | Ф300 | |
Max. processing length | mm | 380 | 400 | |
Max. rod through hole diameter of main spindle/sub-spindle | mm | Ф46/46 | Ф46/46 | |
Spindle Cylinder Chuck | Spindle nose | / | A2-5 | A2-5 |
Spindle through hole diameter | mm | Ф56 | Ф56 | |
Spindle Max. speed | rpm | 5500 | 5500 | |
Direct drive spindle motor power | kw | 17.5 | 17.5 | |
Direct drive spindle motor torque | Nm | 62-125 | 62-125 | |
Spindle hydraulic cylinder/chuck | / | 6" | 6" | |
Sub-spindle Chuck | Sub-spindle nose | / | A2-5 | A2-5 |
Sub-spindle through hole diameter | mm | Ф56 | Ф56 | |
Sub-spindle Max. speed | rpm | 5500 | 5500 | |
Direct drive spindle motor torque | Nm | 62-125 | 17.5 | |
Direct drive sub-spindle motor power | kw | 17.5 | 62-125 | |
Sub-spindle hydraulic cylinder/collet | / | 6" | 6" | |
X/Z/Y/W axis feed Parameters | X/Z/Y/S motor power X | kw | 2.5/2.5/1.2/1.2 | 2.5/2.5/1.2 |
X/Z axis travel | mm | 320/470 | 210/490 | |
Y/S axis travel | mm | 90(±45)/440 | 440 | |
X/Z/Y/S axis fast movement | mm/min | 24/24/8/24 | 24/24/24 | |
Slide type | mm | Roller 35 | 35 | |
Positioning accuracy | mm | ±0.005 | ±0.005 | |
Repeat positioning accuracy | mm | ±0.003 | ±0.003 | |
Servo power Turret parameters | Power turret type | / | BMT55-12T | BMT55-12T |
Power turret power/torque | Kw | 5.5/35 | 5.5/35 | |
Power tool holder Max. speed | rpm | 6000 | 6000 | |
Outer diameter tool holder specifications | mm | 25*25 | 25*25 | |
Inner diameter tool holder specifications | mm | Ф40 | Ф40 | |
Adjacent tool change time | sec | 0.2 | 0.2 | |
Dimensions | Occupied area Approx. | mm | 2600*2100*1900 | 2600*2100*1900 |
Machine weight Approx. | kg | 4200 | 4200 | |
Other | Cutting fluid tank volume | L | 150 | 150 |
Hydraulic unit box volume | L | 40 | 40 | |
Hydraulic oil pump motor power | kw | 1.5 | 1.5 | |
Lubricating oil tank volume | L | 2 | 2 | |
Automatic lubrication pump motor power | W | 50 | 50 | |
Cooling water pump power | W | 750 | 750 |
