Oturn
High rigidity, heavy cutting, and high stability:
It adopts an integral cast inclined bed, a 30° inclined bed structure, and a thick reinforced rib design to minimize distortion and thermal deformation.
High precision and high dynamic response:
High-precision ball bearings are used at the front and rear to achieve high spindle rigidity and high spindle rotation accuracy.
The spindle servo unit has high precision and is easy to maintain.
High efficiency:
The maximum spindle speed is 4500rpm/min, and the rapid movement can reach 30m/min.
Technical Specifications
Item | Specification | |
Bed | The bed and base are made of high-quality cast iron, and the bed is slanted at 30°. | |
Processing range | Maximum rotation diameter of bed | 600mm |
Maximum processing diameter of discs | 300mm | |
Maximum processing diameter of pallet | 300mm | |
Maximum processing length of bar | 500mm | |
Maximum bar hole diameter | Φ51mm | |
Travel Feed | X-axis maximum travel | 300mm |
Z-axis maximum travel | 590mm | |
Y-axis maximum travel | ±50mm(Interpolation) | |
X/Z/Y axis rapid movement rate | 30m/min | |
X/Z/Y screw diameter/pitch | 32/10mm | |
X/Z/Y linear guide width | 35mm | |
X-axis servo motor | β12(with brake) | |
Z-axis servo motor | β12 | |
Y-axis servo motor | β12(with brake) | |
Servo turret motor | 3N.m | |
Power head motor | β12 | |
Precision | X/Z axis positioning accuracy | ±0.003mm |
X/Z axis repeat accuracy | ±0.003mm | |
Moving tailstock | Tailstock sleeve taper hole/diameter | Mohs #5 |
Tailstock moving travel | 80~630mm | |
Tailstock pressure range | 5~30Kg/cm2 | |
Tailstock moving method | Programmable hydraulic movement | |
Spindle | Spindle nose type | A2-6 |
Spindle through hole diameter | Φ66mm | |
Spindle maximum speed | 4500 rpm | |
Spindle motor power | 11KW | |
Chuck/rotary cylinder | 8 inches | |
Turret | Servo powered turret | BMT55/12 stations |
Cutterhead size | 330 | |
Tool holder specifications | □25×25 | |
Boring tool holder | Φ32mm | |
0° side milling head (1 piece) | ER32/3000 rpm | |
90° side milling head (1 piece) | ER32/3000 rpm | |
Other | Total capacitance | 26KW |
Machine tool net weight | About 4700Kg | |
Machine size (length*width*height) | 3050×2000×2050mm |