Hard Rail Turning Center TMC Series

Quantity:
Availability:





Inquire Add to Basket

Brand:
Oturn

Hard rail turning center TMC series Single Spindle CNC Lathe Single Spindle Cnc Turning Machine Highly Rigid Spindle Cnc Machine Heavy Duty Cnc Metal Lathe

Features

Technical Specifications

Configuration Introduction

HIGH RIGIDITY AND STABILITY

Integral Cast Inclined Bed and Guide Rails: The CNC Hard Rail Turning Center features an integral cast inclined bed combined with 30° inclined guide rails. This design not only facilitates smooth cutting operations but also allows operators to easily load and unload workpieces. Additionally, the structure is reinforced with thick ribs to minimize distortion and resist thermal deformation, thereby ensuring high stability during heavy cutting tasks.

PRECISION AND DYNAMIC RESPONSE

Spindle with NSK P4 Bearings: Equipped with two pairs of high-precision NSK P4 bearings, the spindle achieves exceptional rigidity and maintains extremely high rotational accuracy. The AC servo motor enables stepless speed regulation, ensuring a quick dynamic response and precise control, essential for high-precision machining.

THERMAL STABILITY

Optimized Spindle Box and Saddle Design: The machine's design aligns the main spindle box and the sliding saddle on the same angular plane. This configuration significantly reduces the distortion caused by thermal deformation of the spindle box, enhancing the machine’s overall accuracy.

High-Speed Rolling Bearings and Grease Lubrication: To maintain consistent thermal stability, the CNC Hard Rail Turning Center utilizes high-speed rolling bearings coupled with a quantitative grease sealing lubrication system. This setup ensures that both the machine body and spindle maintain stable temperatures, further supporting precision and durability in machining operations.

Using high-speed rolling bearings and quantitative grease sealing lubrication to ensure the thermal stability of the body and spindle temperatures.

Technical Specifications

Item		860TMC/1000(H)	860TMC/1500(H)	860TMC/2000(H)
Bed	The bed and base are made of high-quality cast iron, and the bed is slanted at 30°.
Processing range	Maximum rotation diameter of bed	Φ880mm	Φ880mm	Φ880mm
	Maximum processing diameter of discs	Φ600mm	Φ600mm	Φ600mm
	Maximum processing diameter of the carriage	Φ600mm	Φ600mm	Φ600mm
	Maximum processing length of bar	950mm	1550mm	2100mm
	Maximum bar hole diameter	Φ75	Φ75	Φ75
Travel Feed	X-axis maximum travel	330mm	330mm	330mm
	Y-axis maximum travel	150/box way	150/box way	150/box way
	Z-axis maximum travel	1200mm	1800mm	2400mm
	X/Z axis rapid movement rate	16m/min	16m/min	16m/min
	X/Z screw diameter/pitch	X:40/08 Z:50/10	X:40/08 Z:50/10	X:40/08 Z:50/10
	X/Z axis slide way specifications	Square slide way	Square slide way	Square slide way
	X-axis servo motor	α22（with brake）	α22（with brake）	α22（with brake）
	Y-axis servo motor	α12（with brake）	α12（with brake）	α12（with brake）
	Z-axis servo motor	α22	α22	α30
	Turret servo motor	1KW	1KW	1KW
	Power head motor	α22	α22	α22
Precision	X/Z axis positioning accuracy	±0.005/300mm	±0.005/300mm	±0.005/300mm
Precision	X/Z axis repeat accuracy	±0.005/300mm	±0.005/300mm	±0.005/300mm
Tailstock	Tailstock sleeve specifications	Mohs5#/1050mm	Mohs5#/1600mm	Mohs5#/2100mm
	Tailstock sleeve diameter/travel	Φ100/80	Φ100/80	Φ100/80
	Tailstock pressure range	5-30Kg/cm²	5~30Kg/cm²	5~30Kg/cm²
	Tailstock moving method	Manual latch (driven by saddle)	Manual latch (driven by saddle)	Manual latch (driven by saddle)
Spindle	Spindle nose type	A2-8	A2-8	A2-8
	Spindle through hole diameter	Φ87	Φ87	Φ87
	Spindle maximum speed	2500rpm	2500rpm	2500rpm
	Spindle servo motor power	22kw	22kw	30kw
Turret	Servo powered turret	BMT65/12 workstations	BMT65/12 workstations	BMT65/12 workstations
	Tool cutter specifications	380	380	380
	Tool holder specifications	□25*25Φ40	□25*25Φ40	□25*25Φ40
	0 degree side milling head (1 piece)	ER40/4000rpm	ER40/4000rpm	ER40/4000rpm
	90 degree side milling head (1 piece)	ER40/4000rpm	ER40/4000rpm	ER40/4000rpm
Other	Total capacitance	48KW	48KW	57KW
	Machine net weight	About 6500kg	About 7000kg	About 8000kg
	Machine size (lengthwidthheight)	510023002450	600025002350	650025002350

Configuration Introduction

Spindle

High Precision and Heavy-Duty Cutting: The spindle is specifically engineered to manage both high-precision tasks and robust heavy-duty cutting, which significantly boosts productivity and ensures consistent output.
Turret

Enhanced Indexing and Rigidity: Designed to optimize indexing reliability, the turret also ensures high rigidity, which is crucial for maintaining stable and precise machining performance over time.
System

Cutting-Edge Control and Usability: Outfitted with the FANUC F Oi-TF Plus CNC System, the turning center delivers exceptional processing capabilities, a high operational rate, and intuitive usability, making it suitable for a range of complex machining applications.
High Rigidity

Sturdy and Shock-Absorbent Construction: The turning center’s structural components, including its base, are constructed from heavy-duty cast iron. This robust construction provides superior shock absorption and enhances the machine’s stability during demanding cutting processes.
Electrical Box

Efficient Component Protection: The electrical box is meticulously designed to house all the lathe's electrical components securely. It features advanced heat dissipation mechanisms, which prevent overheating and extend the longevity of the system.
Hard Rail

Robust and High Load-Bearing Capacity: The hard rail system is characterized by its high friction and inertia, which, combined with its strong rigidity, allows for substantial load-bearing. This makes the turning center particularly well-suited for rigorous, heavy machining operations.