CNC Horizontal Heavy Roughing Machining Center HB Series

The CNC Horizontal Heavy Roughing Machining Center HB Series has the characteristics of high rigidity, high precision and high efficiency machining.

Quantity:
Availability:





Inquire Add to Basket

Brand:
Oturn

CNC Horizontal Heavy Roughing Machining Center HB Series High Quality CNC Horizontal machining center Swiss Type Cnc Horizontal Milling Machine Cnc Horizontal Machining Tools HMC Milling Turning Cnc Machine

Features

Technical Specifications

Configuration Introduction

Table Type Horizontal Machining Center

This machining center features a combination of linear guideways on the X and Z axes and a hard guideway on the Y axis, providing a balanced design for various machining needs.

Its spindle box is equipped with a full-gear structure, delivering high torque. With its cost-effective design, this machine is well-suited for both rough and semi-finish machining operations.

Moving Column Heavy Roughing Horizontal Machining Center

Designed with a moving column structure, this machining center enhances rigidity on the Y-axis by upgrading it to a hard guideway, while the X and Z axes remain linear guideways.

The gearbox has been upgraded to significantly improve cutting efficiency.

Additionally, the spindle speed has been increased to 4500 rpm, and a new type of shield has been incorporated, making this center ideal for heavy roughing operations.

Floor Type Horizontal Machining Center (Heavy Roughing Machine)

This heavy-duty machining center is built for intense cutting tasks, capable of handling large loads with its floor-standing structure.

The spindle, equipped with a full gear system, operates between 10-3000 revolutions per minute, with torque exceeding 1000 N.m. The ram can extend up to 700mm for processing, making it particularly effective for roughing and semi-finishing automotive molds.

The motor torque has been increased by 30-37 kW, and with an enlarged gear and optimized strip structure, the cutting force is greatly enhanced, making this machine a powerful tool for demanding machining tasks.

Technical Specifications

Item		H B 1 7 1 2 ( Worktable type )	H B 1 8 1 2 (Moving column type )	HB2516/HB3016/HB3020 (Floor-standing type)
Processing range
X-axis travel	mm	1700 (the worktable moves left and right)	1800 (the worktable moves left and right)	2500/3000/3000 (column moves left and right)
Y-axis travel	mm	1200 (the spindle box moves up and down)	1200 (the spindle box moves up and down)	1600/1600/2000 (spindle box moves up and down)
Z-axis travel	mm	700 (the worktable moves forward and backward)	800 (the column moves forward and backward)	700 (ram extends forward and backward)
Spindle center to table	mm	0-1200	130-1330	100-1700/100-1700/100-2100
Spindle end face to table center	mm	150-850	200-1000	200
Guide rail type		XZ axis linear guide/Y axis hard guide		XZ axis linear guide/Y axis hard guide
Worktable
Worktable dimensions	mm	1700*850	1600*1000	25001550/30001550/3000*1550
Worktable load bearing	kg	5000	8000	30000
T-slot specifications (width*spacing)	mm	18*150	22*150	22*200
Spindle
Drive mode		Full gear	Full gear	Full gear
Maximum speed	rpm	3000	4500	3000
Spindle power	kW	15/18.5	15/18.5	30/37
Maximum spindle torque	N.m	286/472	473/894	498/748
Spindle taper/pull pin		BT50-45°	BT50-45°	BT50-45°
Drive feed
Maximum rapid movement speed X/Y/Z	m/min	10/10/10	10/10/10	10/10/10
Maximum cutting speed X/Y/Z	m/min.	6/6/6	6/6/6	6/6/6
Minimum resolution	mm	0.001	0.001	0.001
Accuracy (implementation standard GB/T19362.1-2003)
X/Y/Z Positioning accuracy	mm	0.03	0.03	0.05
X/Y/Z Repeatability	mm	0.02	0.02	0.03
Others
CNC system		FANUC Oi MF(5)	FANUC Oi MF(5)	FANUC Oi MF(1)
power	kW	60	60	75
Machine height	mm	3300	3300	4200/4200/4700
Foolr Area (length*witdth)	mm	6600*4300	5600*4500	60004500/70004500/7000*4500
Machine weight (approx.)	kg	15000	20000	25T/28T/32T

FANUC Oi-MF

The CNC Horizontal Heavy Roughing Machining Center is equipped with the FANUC Oi-MF system as the standard control unit. This advanced CNC system is recognized for its exceptional processing performance and high operational efficiency.
The FANUC 0i-MF system features robust capabilities for handling complex machining tasks with precision, and its user-friendly interface simplifies operation, making it accessible for both novice and experienced operators. The system's high processing rate ensures rapid execution of machining operations, reducing overall cycle times and enhancing productivity.
For users with specific preferences or requirements, alternative CNC systems, such as those from SIEMENS or Mitsubishi, are available options, providing flexibility to integrate with various production environments.
Spindle

The machining center utilizes a BT50 spindle designed for high-speed, high-efficiency, and high-torque applications. This spindle type is crucial for handling a wide range of materials, from soft to hard, and is particularly well-suited for heavy roughing operations. The high-speed capability of the BT50 spindle allows for fast material removal rates, while its high torque performance ensures effective cutting even with larger and more challenging workpieces. This spindle design contributes to enhanced machining performance, ensuring that the center can meet diverse processing needs while maintaining precision and reliability.
Tool Magazine

The machining center comes standard with a 24-tool magazine, which can be upgraded to a 40-tool or 60-tool magazine depending on the specific requirements of the machining tasks. This flexibility allows the center to accommodate various cutting scenarios and enhance productivity by minimizing tool change times. The ability to store and access a larger number of tools reduces the need for manual intervention, supporting continuous and efficient machining operations. The expanded tool capacity ensures that the center can handle complex and multi-step processes with ease, catering to a wide range of production needs and optimizing overall operational efficiency.